Assuming you have an ATX power supply and a motherboard that supports power management...
Reboot. If your system will not start, power cycle and select the second line down in the list of OSs when the boot loader starts.
Now, any good shutdown and power off program will actually work.
file: /Techref/os/win/winnt/pwroff.htm, 1KB, , updated: 2004/9/14 19:08, local time: 2025/5/4 03:39,
18.220.204.192:LOG IN
|
©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/tecHREF/os/win/winnt/pwroff.htm"> Getting NT to power off after shutdown</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to www.piclist.com! |
.